Tube Fittings - Double Compression

  1. Home
  2. Products
  3. Tube Fittings - Double Compression
Send Enquiry

Tube Fittings - Double Compression

The CHAMP high quality, leak-proof Double Ferrule Tube Fittings for Process, Power, Automation and Instrumentation applications. These Fittings design to provide secure leak-proof joints capable of satisfying high pressure, vacuum and vibration applications.

Specifications:-

  • Size: 1/8” to 3/4”
  • End Connection: OD Tube, NPT, BSP, BSPT, ISO
  • Material: SS 316, SS316L, SS304, SS304L, CS, Brass
  • Thread Conformance Standard: NPT as per Std. ANSI B1.20.1
  • Types of Fittings: Male Connector, Male Elbow, Male Branch Tees, Male Run Tees, Female Connectors, Female Elbows, Unions, Reducing Union, Bulkhead Unions, Union Elbows, Union Tees, Union Cross, Tube Cap, Tube Plug, Nut, Front Ferrule, Back Ferrrule, Tube Socket Weld Connector.
  • Testing:
    • - SS Fittings are tested up to 3000 psig Hydraulically & 150 psig Pneumatically.
    • - CS Fittings are tested up to 3000 psig Hydraulically, & 150 psig Pneumatically.
    • - Brass Fittings are tested up to 1000 psig Hydraulically & 150 psig Pneumatically.
  • Temperature: 20°C to +100°C

Features:-

  • - CHAMP Double Ferrule Tube Fittings consists of four precision machined components for a reliable LEAK PROOF JOINT.
  • - Back Ferrule provides a excellent Mechanical and anti vibration hold on the Tube (available in SS316/SS316L).
  • - The Front Ferrules provides a pressure seal between the Tube and the Body.
  • - The Nut is Silver Plated to ensure no galling on body thread.
  • - Fittings are available in many combinations of sizes, shapes which reduce the number of joints needed in a system.
  • - Good finishes meet quality appearance requirements for precision equipment.
  • - Male threads are protected with dust cap.
  • - Product shaped (Elbows, Tees, Crosses) are hot forged and machined, while Straights are manufactured from cold drawn bar stock and machined.

To provide a reliable, leak-proof connection in Instrumentation and Process Tubing Systems. CHAMP Tube Fitting are available, assembled and ready to use with variety of Tubing Materials. For 1-1/4 turns of the nut are required for 1/4" (6 mm) Tube OD to 1”(25mm) Tube OD Fittings & 3/4 of a turn of the nut is required for 1/16”(2mm) Tube OD to 3/16"(4mm) Tube OD Fittings.